Supermicro X12SPZ-SPLN6F - Page 107

Chapter 4: BIOS
107
Boot URI
Highlight the feature and press enter to create a boot URI.
Instance of Priority 2 - Priority 6:
Use this feature to set the rank target port. The default value is 0.
iSCSI Conguration
Attempt Priority
Attempt Priority
Use this feature to set the attempt priorities. The options are Host Attempt, Redsh
Attempt, and Rsd Attempt.
Commit Changes and Exit
Select this feature to save the changes and exit.
Host iSCSI Conguration
iSCSI Initiator Name
This feature allows you to enter the unique name of the iSCSI Initiator in IQN format. Once
the name of the iSCSI Initiator is entered into the system, congure the proper settings for
the following features.
Add an Attempt
Delete Attempts
Change Attempt Order
Intel(R) I350 Gigabit Network Connection - 3C:EC:EF:2C:7E:14
Intel(R) I350 Gigabit Network Connection - 3C:EC:EF:2C:7E:15
Intel(R) I350 Gigabit Network Connection - 3C:EC:EF:2C:7E:16
Intel(R) I350 Gigabit Network Connection - 3C:EC:EF:2C:7E:17
Firmware Image Properties
This submenu displays NVM rmware detected by the system.