Supermicro X12SPZ-SPLN6F - Page 108

Super X12SPZ-SPLN6F/LN4F User's Manual
108
NIC Conguration
Link Speed
Use this feature to specify the port speed used for the selected boot protocol. The options
are Auto Negotiated, 10 Mbps Half, 10 Mbps Full, 100 Mbps Half, and 100 Mbps Full.
Wake On LAN
Select Enabled for wake on LAN support, which will allow the system to wake up when an
onboard LAN device receives an incoming signal. The options are Disabled and Enabled.
Blink LEDs
Use this feature to identify the physical network port by blinking the associated LED. Use
the keyboard to select a value.
UEFI Driver
Adapter PBA
Device Name
Chip Type
PCI Device ID
PCI Address
Link Status
MAC Address
Virtual MAC Address
Broadcom BCM57414 NetXtreme-E 10Gb/25Gb RDMA Ethernet
Controller 3C:EC:EF:30:2A:34
Broadcom BCM57414 NetXtreme-E 10Gb/25Gb RDMA Ethernet
Controller 3C:EC:EF:30:2A:35
Firmware Image Menu
Broadcom BCM57414 NetXtreme-E 10Gb/25Gb RDMA Ethernet Controller -
3C:EC:EF:30:2A:34
Broadcom BCM57414 NetXtreme-E 10Gb/25Gb RDMA Ethernet Controller -
3C:EC:EF:30:2A:35
Boot Code
This feature displays the boot code address in dotted-decimal notation.