Supermicro X12SPZ-SPLN6F - Page 109

Chapter 4: BIOS
109
MBA
This feature displays the multiple boot agent address in dotted-decimal notation.
EFI
This feature displays the UEFI option ROM address in dotted-decimal notation.
iSCSI Boot
This feature displays the iSCSI boot address in dotted-decimal notation.
CCM
This feature displays the conguration ROM address in dotted-decimal notation.
NCSI
This feature displays the management FW address in dotted-decimal notation.
RDMA FW
This feature displays the RDMA FW address in dotted-decimal notation.
Device Conguration Menu
Broadcom BCM57414 NetXtreme-E 10Gb/25Gb RDMA Ethernet Controller -
3C:EC:EF:30:2A:34
Broadcom BCM57414 NetXtreme-E 10Gb/25Gb RDMA Ethernet Controller -
3C:EC:EF:30:2A:35
Multi-Function Mode
Use this feature to select the the NIC hardware mode. The options are SF and NPAR 1.0.
Number of VFs Per PF
Use this feature to congure the number of virtual functions per physical function in multiples
of 8 (1 - 128). The maximum value is 128, divided by the number of ports.
SR-IOV Support
Use this feature to enable or disable Single Root IO Virtualization Support. The options
are Disabled and Enabled.
Number of MSI-X Vectors per VF
Use this feature to congure the number of MSI-X vectors per VF (0 -128). The default
value is 16.
Maximum Number of PF MSI-X Vectors
Use this feature to congure the number of PF MSI-X vectors (0 - 512 per controller). The
default value is 74.