EasyManua.ls Logo

Supermicro X12SPZ-SPLN6F - Page 76

Supermicro X12SPZ-SPLN6F
145 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Super X12SPZ-SPLN6F/LN4F User's Manual
76
Wait For "F1" If Error
Use this feature to force the system to wait until the "F1" key is pressed if an error occurs.
The options are Disabled and Enabled.
INT19 (Interrupt 19) Trap Response
Interrupt 19 is the software interrupt that handles the boot disk function. When this feature
is set to Immediate, the ROM BIOS of the host adapters will "capture" Interrupt 19 at boot
up immediately and allow the drives that are attached to these host adapters to function as
bootable disks. If this feature is set to Postponed, the ROM BIOS of the host adapters will not
capture Interrupt 19 immediately and allow the drives attached to these adapters to function
as bootable devices at boot up. The options are Immediate and Postponed.
Re-try Boot
If this feature is enabled, the BIOS will automatically reboot the system from a specied boot
device after its initial boot failure. The options are Disabled, Legacy Boot, and EFI Boot.
Power Conguration
Watch Dog Function
If enabled, the Watch Dog Timer will allow the system to reset or generate NMI based on
jumper settings when it is expired for more than ve minutes. The options are Disabled and
Enabled.
*If the feature above is set to Enabled, Watch Dog Action will be available for
conguration:
Watch Dog Action
Use this feature to reset the system or generate NMI. The options are Reset and NMI.
Restore on AC Power Loss
Use this feature to set the power state after a power outage. Select Stay O󰀨 for the system
power to remain o󰀨 after a power loss. Select Power On for the system power to be turned
on after a power loss. Select Last State to allow the system to resume its last power state
before a power loss. The options are Stay O󰀨, Power On, and Last State.
Power Button Function
This feature controls how the system shuts down when the power button is pressed. Select
4 Seconds Override for you to power o󰀨 the system after pressing and holding the power
button for four seconds or longer. Select Instant O󰀨 to instantly power o󰀨 the system as soon
as you press the power button. The options are Instant O󰀨 and 4 Seconds Override.

Table of Contents

Related product manuals