Supermicro X12STL-IF User Manual

27
Chapter 2: Installation
2.4 Memory Support and Installation
Note: Check the Supermicro website for recommended memory modules.
Important: Exercise extreme care when installing or removing DIMM modules to pre-
vent any possible damage.
Memory Support
The X12STL-IF supports up to 64GB of DDR4 ECC UDIMM memory with speeds of up to
3200MHz in two memory slots. Speed support is up to 2666MHz when a Pentium processor
is installed. Speed support is up to 2933 MT/s for 2R2R congurations. Refer to the table
below for the recommended DIMM population order.
Recommended Population (Balanced)
DIMMA1 DIMMB1 Total System Memory
4GB 4GB 8GB
8GB 8GB 16GB
16GB 16GB 32GB
32GB 32GB 64GB

Supermicro X12STL-IF Specifications

General

Brand	Supermicro
Model	X12STL-IF
Category	Motherboard
Language	English