Supermicro X12STL-IF - Page 73

Chapter 4: BIOS
73
Power Down Mode
Use this feature to select the power down mode. The options are Auto, No Power Down,
APD, and PPD-DLLo󰀨.
Pwr Down Idle Timer
Use this feature to set the power down idle timer. The default value is 0.
Memory Scrambler
Use this feature to enable or disable memory scrambler support. The options are Disabled
and Enabled.
Force ColdReset
Use this feature to enable or disable a cold boot during a MRC execution. The options are
Enabled and Disabled.
Force Single Rank
Select enabled to use only Rank 0 in each DIMM. The options are Disabled and Enabled.
Fast Boot
Use this feature to enable or disable fast path through the memory reference code. The
options are Disabled and Enabled.
Train on Warm boot
Use this feature to enable or disable training on warm boot. The options are Disabled and
Enabled.
Memory Test on Warm Boot
Use this feature to enable or disable base memory test run on warm boot. The options are
Disabled and Enabled.
REFRESH_2X_MODE
Use this feature to enable 2x memory refresh support to enhance memory performance.
The options are Disabled, 1- Enabled for WARM or HOT, and 2- Enabled HOT only.
DMI Conguration
DMI Max Link Speed
Use this feature to select DMI Max Link Speed. The options are Gen1, Gen2, and Gen3.
DMI Gen3 ASPM
DMI Max Link Speed
Use this feature to select DMI Max Link Speed. The options are Gen1, Gen2, and Gen3.