Supermicro X12STL-IF - Page 98

Super X12STL-IF User's Manual
98
Secure Boot
Use this feature to enable secure boot. The options are Disabled and Enabled.
Secure Boot Mode
Use this item to congure Secure Boot variables without authentication. The options are
Standard and Custom.
CSM Support
This feature is for manufacturing debugging purposes.
Restore Factory Keys
Force System to User Mode. Install factory default Secure Boot key databases.
Reset to Setup Mode
This feature deletes all Secure Boot key databases from NVRAM.
Enter Audit Mode
Use this feature to enter the audit mode workow.
Key Management
This submenu allows you to congure the following Key Management settings.
Provision Factory Keys
Force System to User Mode. Install factory default Secure Boot key databases.
Restore Factory Keys
Force System to User Mode. Install factory default Secure Boot key databases.
Reset to Setup Mode
This feature deletes all Secure Boot key databases from NVRAM.
Export Secure Boot variables
This feature allows you to copy NVRAM content of Secure boot variables to les in a
root folder on a le system device.