Supermicro X13SEI-TF - Page 111

Chapter 4: UEFI BIOS
111
StationMACAddress(Availablewhen"CongurationAddressSource"issetto
Static)
This feature displays the Station MAC address for this computer. Mac addresses are six
two-digit hexadecimal numbers.
Gateway IP Address
This feature displays the Gateway IP address for this computer. This should be in decimal
and in dotted quad form (i.e., 172.29.0.1).
VLAN(Availablewhen"UpdateIPMILANConguration"issettoYes)
This feature displays the status of VLAN support. The options are Disable and Enable.
VLAN ID (Available when "VLAN" is set to Enable)
Use this feature to create a new LAN ID by using an existing VLAN or creating a new VLAN
ID. Enter a valid value between 1–4094.
*****************************
CongureIPv6Support
******************************
IPv6 Address Status
This feature displays the status of the IPv6 address.
IPv6 Support
Use this feature to enable IPv6 support. The options are Enabled and Disabled.
CongurationAddressSource(Availablewhen"IPv6Support"issettoEnabled)
Use this feature to select the source of the IPv6 connection. If Static Conguration is selected,
you will need to know the IP address of IPv6 connection and enter it to the system manually
in the eld. If the Dynamic Host Conguration Protocol (DHCP) related option is selected,
the BIOS will search for a DHCP server in the network that is attached to and request the
next available IP address for this computer. The options are Static Conguration, DHCPv6
Stateless, and DHCPv6 Stateful.
IPv6Address(DHCPv6Static)(Availablewhen"CongurationAddressSource"is
settoStaticConguration)
This feature displays the station IPv6 address. Press <Enter> to change the setting.
PrexLength(Availablewhen"CongurationAddressSource"issettoStatic
Conguration)
This feature displays the prex length. Press <Enter> to change the setting.