Supermicro X13SEI-TF - Page 115

Chapter 4: UEFI BIOS
115
Security Function
Select Set Password to set an HDD/SATA password which allows you to congure the security
settings of the HDD/SATA device. Select Security Erase - Password to enter a SATA user
password to allow you to erase the password and the contents previously stored in the HDD/
SATA device. Select Security Erase - Password to use the manufacturer default password
"111111111" as the SATA user password and allow you to erase the contents of the HDD/SATA
device by using this default password. The options are Disabled, Set Password, Security
Erase - Password, Security Erase - PSID, and Security Erase - Without Password.
Note: The option, Security Erase - PSID, is based on the storage device support.
Password
Use this feature to set the SATA user password which allows you to congure the SMCI
Security Erase settings by using the SATA user password.
Lockdown Mode (Available when the DCMS key is activated)
Select Enabled to support Lockdown Mode that will prevent existing data or keys stored in the
system from being altered or changed in an e󰀨ort to preserve system integrity and security.
The options are Disabled and Enabled.
Secure Boot
Note: For detailed instructions on how to congure Security Boot settings, refer to the
Security Boot Conguration User's Guide posted on the web page under the link: http://
www.supermicro.com/support/manuals/.
This section displays the contents of the following secure boot features:
• System Mode
• Secure Boot
Secure Boot
Select Enabled to congure Secure Boot settings. The options are Disabled and Enabled.
Secure Boot Mode
Use this feature to select the desired secure boot mode for the system. The options are
Standard and Custom.
CSM Support
If this feature is set to Enabled, legacy devices will be supported by the system. The options
are Disabled and Enabled.