Supermicro X13SEI-TF - Page 83

Chapter 4: UEFI BIOS
83
Select Enable to enable Intel Volume Management Device (VMD) technology support
for the root port specied. The options are Disable and Enable.
CPU SLOT1 PCIe 5.0 X8 VMD / CPU SLOT2 PCIe 5.0 X8 VMD (Available
when the device is detected by the system and "Enable/Disable VMD" above
is set to Enable)
Select Enable to enable Intel VMD technology support for the root port specied.
The options are Disable and Enable.
Hot Plug Capable
Select Enable to enable Hot Plug support for the root ports specied. This feature
allows you to change the devices on those root ports without shutting down the
system. The options are Disable and Enable.
VMDCongforIOU2
Enable/Disable VMD
Select Enable to enable Intel Volume Management Device (VMD) technology support
for the root port specied. The options are Disable and Enable.
M.2-C1 VMD / M.2-C2 VMD / CPU SLOT7 PCIe 5.0 X8 VMD (Available when
the device is detected by the system and "Enable/Disable VMD" above is set
to Enable)
Select Enable to enable Intel VMD technology support for the root port specied.
The options are Disable and Enable.
Hot Plug Capable
Select Enable to enable Hot Plug support for the root ports specied. This feature
allows you to change the devices on those root ports without shutting down the
system. The options are Disable and Enable.
VMDCongforIOU3
Enable/Disable VMD
Use this feature to enable or disable the volume management device for this stack.
The options are Disable and Enable.
NVME0 VMD / NVME1 VMD / NVME2 VMD / NVME3 VMD (Available when the
device is detected by the system and "Enable/Disable VMD" above is set to
Enable)
Select Enable to enable Intel VMD technology support for the root port specied.
The options are Disable and Enable.
Hot Plug Capable