Chapter 4: UEFI BIOS
111
Recorder Mode
Select Enabled to capture the data displayed on a terminal and send it as text messages
to a remote server. The options are Disabled and Enabled.
Resolution 100x31
Select Enabled for extended-terminal resolution support. The options are Disabled and
Enabled.
Putty KeyPad
This feature selects Function Keys and KeyPad settings for Putty, which is a terminal
emulator designed for the Windows OS. The options are VT100, LINUX, XTERMR6, SCO,
ESCN, and VT400.
Legacy OS Redirection Resolution
Use this feature to select the numbers of rows and columns used in Console Redirection
for Legacy OS support. The options are 80x24 and 80x25.
Redirection After BIOS POST
Use this feature to enable or disable legacy console redirection after BIOS POST. When
the option - BootLoader is selected, legacy console redirection is disabled before booting
the OS. When the option - Always Enable is selected, legacy console redirection remains
enabled upon OS bootup. The options are Always Enable and BootLoader.
Serial Port for Out-of-Band Management/Windows Emergency Management Services
(EMS)
The feature allows you to congure Console Redirection settings to support Out-of-Band
Serial Port management.
Console Redirection EMS
Select Enabled to use the SOL port for Console Redirection. The options are Disabled and
Enabled.
Console Redirection Settings (Available when "Console Redirection
EMS" above is set to Enabled)
Out-of-Band Mgmt Port
The feature selects a serial port in a client server to be used by the Microsoft Windows
Emergency Management Services (EMS) to communicate with a remote host server. The
options are COM1 and SOL/COM2. Please note that the option of SOL/COM2 indicates a
shared serial port. SOL is available with BMC support.
To Next Page
Loading...
