Supermicro X13SRA-TF - Page 113

Chapter 4: UEFI BIOS
113
PXE Boot Wait Time (Available when "Network Stack" is set to Enabled)
Use this feature to set the wait time (in seconds) upon which the system BIOS will wait for
you to press the <ESC> key to abort PXE boot instead of proceeding with PXE boot by
connecting to a network server immediately. Press "+" or "-" on your keyboard to change the
value. The default setting is 0.
Media Detect Count
Use this feature to select the wait time (in seconds) for the BIOS ROM to detect the presence
of a LAN media either via the Internet connection or via a LAN port. Press "+" or "-" on your
keyboard to change the value. The default setting is 1.
MAC:(MAC address)-IPv4 Network Conguration
Congured
Select Enabled to show whether the network address has been successfully congured.
The options are Disabled and Enabled.
Enable DHCP (Available when "Congured" is set to Enabled)
Select Enabled to support Dynamic Host Conguration Protocol (DHCP) which allows the
BIOS to search for a DHCP server attached to the network and request the next available
IP address for this computer. The options are Disabled and Enabled.
Local IP Address (Available when "Congured" is set to Enabled and "Enabled
DHCP" is set to Disabled)
Use this feature to enter an IP address for the local machine.
Local NetMask (Available when "Congured" is set to Enabled and "Enabled
DHCP" is set to Disabled)
Use this feature to set the netmask for the local machine.
Local Gateway (Available when "Congured" is set to Enabled and "Enabled
DHCP" is set to Disabled)
Use this feature to set the gateway address for the local machine.
Local DNS Servers (Available when "Congured" is set to Enabled and "Enabled
DHCP" is set to Disabled)
Use this feature to set the Domain Name System (DNS) server address for the local
machine.
Save Changes and Exit
Press <Enter> to save changes and exit. The options are Yes and No.