Supermicro X13SRA-TF - Page 12

12
Super X13SRA-TF User's Manual
Connector Description
12V_PUMP_PWR1 12V 4-pin Power Connector for CPU Liquid Cooling Pump
AUDIO FP Front Panel Audio Header
BATTERY Onboard Battery
COM1 COM Port (Back Panel)
CPU SLOT2/4/6 PCIe 5.0 x16 Slots
FAN1, FAN2 CPU Fan Headers
FANA – FANC System Fan Headers
HD AUDIO Back Panel High Denition Audio Port
JD1 Speaker/Buzzer Header
JF1 Front Control Panel Header
JL1 Chassis Intrusion Header
JOH1 Overheat LED Header
JPI2C1 Power Supply SMBus I
2
C Header
JPW1 24-pin ATX Main Power Connector (Required)
JPW2, JPW3 +12V 8-pin CPU Power Connectors
JRK1
Intel VROC Key Header
Note: A VROC hardware key is required for VROC RAID function.
JSD1 SATA DOM (Disk-On-Module) Power Connector
JSPDIF_OUT Sony/Philips Digital Interface (S/PDIF) Out Header
JSTBY1 Standby Power Header (5V)
JTPM1 Trusted Platform Module (TPM)/Port 80 Header
JUIDB1 Unit Identier (UID) Switch / BMC Reset Button
LAN1 RJ45 1GbE LAN Port (Shared IPMI Port)
LAN2 RJ45 10GbE LAN Port
M.2-C01, M.2-C02 PCIe 5.0 x4 M.2 M-key Sockets (Support 22110/2280 form factors and RAID 0/1)
SATA0 – SATA5 Intel Serial ATA (SATA 3.0) Ports 0 – 5 (6 Gb/second) (Support RAID 0/1/5/10)
PCH SLOT1 PCIe 4.0 x4 Slot
SP1 Internal Speaker/Buzzer
USB0/1 Front Access USB 2.0 Header
USB2/3 Front Access USB 3.2 Gen. 1 Header (5Gb, Type-A)
USB4, USB5 Back Panel USB 3.2 Gen. 2 Ports (10Gb, Type-A)
USB6, USB7 Back Panel USB 3.2 Gen. 2 Ports (10Gb, Type-A)
USB8 Back Panel USB 3.2 Gen. 2x2 Port (20Gb, Type-C)
USB9 Front Access USB 3.2 Gen. 2x2 Header (20Gb, Type-C)
VGA VGA Port (IPMI only)
Note: For detailed instructions on how to congure VROC RAID settings, please refer
to the VROC RAID Conguration User's Guide posted on the web page under the link:
https://www.supermicro.com/support/manuals/.