Supermicro X13SRA-TF - Page 122

Super X13SRA-TF User's Manual
122
iSCSI Initiator Parameters
IP Address
Use this feature to congure the iSCSI initiator IP address.
Subnet Mask
Use this feature to set the netmask for the iSCSI initiator.
Default Gateway
Use this feature to set the gateway address for the iSCSI initiator.
iSCSI Name
Use this feature to enter the unique initiator name in iSCSI qualied name (IQN) format.
CHAP ID (Available when "CHAP Authentication" is set to Enabled)
Use this feature to enter the iSCSI initiator CHAP ID is displayed.
CHAP Secret (Available when "CHAP Authentication" is set to Enabled)
Use this feature to enter the iSCSI initiator CHAP secret (password) is displayed.
iSCSI First Target Parameters
IP Address
Use this feature to congure the iSCSI target IP address.
TCP Port
Use this feature to congure the iSCSI target TCP port number (1 – 65535). The default
value is 3260.
Boot LUN
Use this feature to congure the boot LUN number (0 – 255). The default value is 0.
iSCSI Name
Highlight the feature and press enter to create an iSCSI name.
CHAP Secret (Available when "CHAP Mutual Authentication" is set to Enabled)
Use this feature to specify the iSCSI storage target CHAP secret (password).