Chapter 4: UEFI BIOS
123
Device Level Conguration
Virtualization Mode
This feature is not supported.
Shared Memory Features
Use this feature to disable the usage of reserved memroy regions to allow direct assignment
of the device to guest virtual machines. Options are Disabled and Enabled.
Active physical Functions
Use this feature to specify which physical functions are enabled. Disabled functions will
not be exposed and their associated ports will be completely shut down. Options are PF0
Only, "PF0 and PF1", "PF0, PF1 and PF2", "PF0, PF1, PF2 and PF3", "PF0, PF1, PF2,
PF3 and PF4", "PF0, PF1, PF2, PF3, PF4 and PF5", "PF0, PF1, PF2, PF3, PF4, PF5 and
PF6", and All.
Blink LEDs
Use this feature to identify the physical network port by blinking the associated LED. The
default setting is 0 (up to 15 seconds).
The following information is displayed:
• UEFI Driver
• Adapter PBA
• Device Name
• Chip Type
• PCI Device ID
• PCI Address
• Link Status
• Link Speed Status
• MAC Address
• Virtual MAC Address
To Next Page
Loading...
