Supermicro X13SRA-TF - Page 136

Super X13SRA-TF User's Manual
136
Set User Password (Available when "Security Frozen:" above is No)
Press <Enter> to set the HDD user password.
Secure Boot
Note: For detailed instructions on how to congure Security Boot settings, please refer
to the Security Boot Conguration User's Guide posted on the web page under the
link: https://www.supermicro.com/support/manuals/.
The following information is displayed:
• System Mode
• Secure Boot
Secure Boot
Select Enabled to congure Secure Boot settings. The options are Disabled and Enabled.
Secure Boot Mode
Use this feature to select the desired secure boot mode for the system. The options are
Standard and Custom.
Enter Audit Mode (Available when "Secure Boot Mode" is set to
Custom)
Select Ok to enter the Audit Mode workow. It will result in erasing of Platform Key (PK)
variables and reset system to the Setup/Audit Mode.
Enter Deployed Mode / Exit Deployed Mode (Available when
"Secure Boot Mode" is set to Custom)
Select Ok to reset system to the User Mode or to the Deployed Mode.
Key Management (Available when "Secure Boot Mode" is set to
Custom)
Restore Factory Keys (Available when any secure keys have been
installed)
Select Yes to restore manufacturer default keys used to ensure system security. The options
are Yes and No.
Reset To Setup Mode (Available when any secure keys have been
installed)
This feature resets the system to the Setup Mode. The options are Yes and No.