Supermicro X13SRA-TF - Page 56

56
Super X13SRA-TF User's Manual
Front Panel Audio Header
A 10-pin audio header (AUDIO FP) located on the motherboard allows you to use the onboard
sound chip (ALC888S) for audio function. Connect an audio cable to this header to use this
feature. Refer to the table below for pin denitions
HD Front Panel Audio
Pin Denitions
Pin# Denition Pin# Denition
1 Microphone_Left 2 Audio_Ground
3 Microphone_Right 4 Audio_Detect
5 Line_2_Right 6 Ground
7 Jack_Detect 8 Key
9 Line_2_Left 10 Ground
JSPDIF_OUT Header
The SPDIF OUT (JSPDIF_OUT) is used for digital audio output. You will also need the
appropriate cable to use these features.
SPDIF OUT
Pin Denitions
Pin# Denition
1 S/PDIF_OUT
2 Ground
1. Front Panel Audio Header (AUDIO FP)
2. SPDIF OUT (JSPDIF_OUT)
BAR CODE BAR CODE
IPMI CODE
MAC CODE MAC CODE SAS CODE
JTPM1
SP1
USB9 (3.2)
(USB3.2 GEN2X2)
UID-LED
JPI2C1
M.2-C01 LED
M.2-C02 LED
JF1
JWD1
JPL1
JPUSB1
JPL2
JSD1
FAN2
HD AUDIO
AUDIO FP
JUIDB1
LED8
COM1
USB0/1
FANB
FANC
BATTERY
DIMME2 DIMMF2 DIMMF1 DIMME1
DIMMA2 DIMMA1 DIMMB2 DIMMB1
SATA 1
SATA 0
SATA 3
SATA 2
SATA 4
SATA 5
M.2-C01
M.2-C02
JPME2
JL1
JRK1
(RAID Key Header)
JCMOS
JBT1
JPW2
JPW3
FAN1
FANA
JSTBY1
CPU SLOT6 PCIe 5.0 X16
JOH1
JPW1
12V_ PUMP_PWR1
USB8
(USB3.2 GEN2X2)
VGA
CPU SLOT4 PCIe 5.0 X16
PCH SLOT1 PCIe 4.0 X4
CPU SLOT2 PCIe 5.0 X16
BMC LED
JSPDIF_OUT
JPAC1
CPU
PCH
BIOS LICENSE
LAN
CTRL
BMC
USB6/7
(USB3.2 GEN2)
LAN1
USB4/5
(USB3.2 GEN2)
LAN2
Power LED
(PCIe 5.0 X4)
(PCIe 5.0 X4)
X13SRA-TF
DESIGNED IN USA
REV:1.01
JD1
(SPEAKER 1-4)
USB2/3 (3.0)
(USB3.2 GEN1)
LAN
CTRL
1
2