Chapter 9 Cautions
www.supmea.com
Chapter 9 Cautions
(1) The transmitter is used in a medium without corrosion to
silicon and stainless steel (or aluminium alloy).
(2) The maximum pressure of the measured system may
not exceed the rated value of 150% FS at the moment of
instantaneous occurrence.
(3) The back end of the pressure transmitter should not be
in contact with conductive, corrosive liquids or gases.
(4) It is not possible to insert a sharp object into the
pressure input hole in order to prevent damage to the
core.
(5) The water can not enter the back-end lead of the sensor.
(6) When using, please strictly follow the precautions,
otherwise the consequences are at your own risk.
To Next Page
Loading...
