Need help?Do you have a question about the suprema BioEntry W2 and is the answer not in the manual?
Warnings and cautions for safe installation procedures and environments.
Warnings and cautions for safe product operation and handling.
Steps for fixing the bracket and attaching the BioEntry W2.
Details connecting the power supply and network (TCP/IP).
Guides on connecting TTL inputs for door sensors and buttons.
General| Type | Intelligent access control reader |
|---|---|
| Log capacity | 1000000 |
| Certification | CE, FCC, KC, REACH, WEE. |
| Product color | Black, Grey |
| Built-in relay | Yes |
| RFID frequency | 13.56 MHz |
| Number of users | 500000 user(s) |
| Carrier frequency | 125 kHz |
| Access code reader | No |
| Authentication type | Access chip/card, Biometric |
| Access chip/card reader type | Contactless |
| International Protection (IP) code | IP67 |
| RS-485 ports | 1 |
| PC connection | RS-485 |
| Flash memory | 2 GB |
| Internal memory | 0.256 GB |
| Processor frequency | 1.2 MHz |
| Sustainability certificates | RoHS |
| Operating temperature (T-T) | -20 - 50 °C |
| Operating relative humidity (H-H) | 0 - 80 % |
| DC current (max) | 1 A |
| DC voltage range | 12 - 12 V |
Weight and Dimensions| Depth | 43.5 mm |
|---|---|
| Width | 50 mm |
| Height | 172 mm |
| Weight | 251 g |
To Next Page
