suprema BioEntry W2 - Name and Function of each Part

Introduction
6
Name and function of each part
Name Feature
LED lamp Indicates the operational status of the product with the color of the LED lamp.
RF card authentication
unit
Reads RF cards for entering and exiting.
Fingerprint
authentication unit
Reads fingerprints placed on it for entering and exiting.
Cable
• TTL input cable
• Wiegand input or output cable
• Power cable
• RS485 cable
• Ethernet connector
•
Relay output cable
LED lamp for Network
Shows the status of the network connection.
Reset button
•
Resets the network configuration. For details, refer to the
Resetting Network Setting
.
• Deletes all data and certificate on the device and reset the settings. For details, refer to the Restoring the
Factory Defaults.
Fingerprint
authentication unit
LED lamp
RF card
authentication unit
LED status indicator for Net
work
Network reset button
Cable