Section 8
8-6
Control Operation Guidelines
WARNING! Improperly maintained controls are hazardous and may cause
sudden loss of control. Make sure all shift/throttle hardware and cables are
regularly inspected and maintained. Improper maintenance may result in a
loss of control, resulting in serious injury or death.
• Most throttle and shift controls have a neutral detent locking lever that must be
released before shifting from NEUTRAL.
• Always pause in NEUTRAL before shifting from FORWARD to REVERSE, or
REVERSE to FORWARD. Most throttle and shift controls have a detent position
for NEUTRAL, FORWARD and REVERSE engagement positions. Engine
damage may occur if you rapidly shift into gear without pausing or allowing the
engine RPM to lower into the approved shifting range.
• When traveling at high speed, never shift into REVERSE while the boat is in
FORWARD gear.
• Always keep the shift control clean and clear of obstructions. NOTICE: All shift
and throttle controls are equipped with a safety switch for start-in-gear
prevention. Place the control in the NEUTRAL position before you attempt to
start the engine.
• Never attempt to shift when the engine is not running.
Figure 7Supreme Dash
Figure 8-7
Supreme_2018.book Page 6 Wednesday, January 31, 2018 9:30 AM
To Next Page
Loading...
