EasyManua.ls Logo

SureCall Fusion2Go - Specification

SureCall Fusion2Go
13 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9
Specication
Product Name Fusion2Go
Uplink Frequency Range (MHz): 698-716 / 776 – 787 / 824-849
1850-1915/ 1710-1755 ( G Block included )
728-746 / 746 – 757 / 869-894
1930-1995 / 2110-2155 ( G Block included )
50 Ω
50 dB
5 dB
≤2.0
CDMA, WCDMA, GSM, EDGE, HSPA+, EVDO, LTE and all cellular standards
5-15V
1 Watt EIRP
RG-174
FME Male (both ends )
<25W
2 LB 3 oz
RSNMOBILE5
Downlink Frequency Range (MHz):
Supported Standards:
DC Car Charge
VSWR:
Maximum Gain:
Noise Figure:
Input Impedance:
Maximum Output Power:
Cable:
RF Connectors:
Power Consumption:
Dimensions:
Operation Temperature: -4ºF to +158ºF
Weight:
FCC ID / IC :
7-7/8” X 5” X 1-3/16”
7784A-MOBILE5CA
Fusion2Go Canada
3 Watt EIRP
The Manufacturer’s rated output power of this equipment is for single carrier operation. For situations
when multiple carrier signals are present, the rating would have to be reduced by 3.5 dB, especially where
the output signal is re-radiated and can cause interference to adjacent band users. This power reduction is
to be by means of input power or gain reduction and not by an attenuator at the output of the device.
https://www.signalbooster.com | 1-855-846-2654 | sales@signalbooster.com

Related product manuals