Button lock
You can activate and deactivate the button lock by keeping the lower right
[-Light] button pressed.
NOTE: You can change views and use the backlight when the button lock is
activated.
Changing values
To change a setting, you have to be in MENU. To enter MENU, keep the right
middle [Mode] button pressed down in the TIME, ALTI&BARO or COMPASS mode.
Any changes you make in MENU take effect immediately. For example, if you
enter TIME-DATE in MENU and change the time from 12:30 to 11:30 and exit.
The time will be set to 11:30.
12
To Next Page
Loading...
