EasyManua.ls Logo

Suunto D4i - Page 32

Suunto D4i
118 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Alarm reasonAlarm type
Mandatory Safety Stop is violated. You should descend
to complete the Safety Stop.
Low priority alarm followed by
"Start descending" beep, re-
peated for three minutes. An
arrow points downwards.
The Deep Stop depth is reached. Make the Mandatory
Deep Stop for the duration shown by the timer.
Low priority alarm followed by
two short beeps, sounded
once. The DEEPSTOP and
timer symbols are displayed.
Cylinder pressure reaches the selected alarm pressure,
10–200 bar / 200–2900 psi. Cylinder pressure reaches
the fixed alarm pressure, 50 bar/700 psi. This alarm
operates only if the pairing to the wireless tank pres-
sure transmitter is performed correctly and the trans-
mission of tank pressure data is not disrupted during
the dive for any reason. You can acknowledge the
alarm.
Low priority alarm, sounded
two times. The Tank pres-
sure value blinks.
The OLF value reaches the fixed 80% or 100%. In the
DIVE Nitrox mode only. You can acknowledge the
alarm.
Low priority alarm, sounded
two times. The OLF% value
blinks if the PO2 value is
greater than 0.5 bar.
33

Table of Contents

Other manuals for Suunto D4i

Related product manuals