EasyManua.ls Logo

Suunto D4i - Mandatory Safety Stops

Suunto D4i
118 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
U
P
D
O
W
N
S
E
L
E
C
T
M
O
D
E
WHEN STOP IS DISPLAYED,
MAKE A RECOMMENDED SAFETY
STOP FOR 3 MINUTES.
NOTE
The Recommended Safety Stop, as the name implies, is recom-
mended. If it is ignored, there is no penalty applied to the following
surface intervals and dives.
5.11.2. Mandatory Safety Stops
When the ascent rate exceeds 10 m/33 ft per minute continuously for more than five
(5) seconds, the microbubble build-up is predicted to be more than is allowed for in
the decompression model. The Suunto RGBM calculation model responds to this by
adding a Mandatory Safety Stop to the dive. The time of this Mandatory Safety Stop
depends on the severity of the ascent rate excess.
The STOP sign is shown in the display and when you reach the depth zone between
6 m and 3 m/20 ft and 10 ft, the CEILING label, ceiling depth, and the calculated Safety
Stop time also appear in the display. Wait until the Mandatory Safety Stop warning
disappears. The total length of the Mandatory Safety Stop time depends on the seri-
ousness of the ascent rate violation.
56

Table of Contents

Other manuals for Suunto D4i

Related product manuals