EasyManua.ls Logo

Suunto D4i - Stopwatch (Timer)

Suunto D4i
118 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
NORMAL
ASCENT
RATE.
ACTIVATED BACKLIGHT, ALARM
AND A BLINKING ASCENT RATE BAR
GRAPH INDICATE YOU ARE ASCENDING
FASTER THAN 10 M/MIN. YOU ARE ADVISED
TO MAKE A MANDATORY SAFETY STOP
WHEN YOU REACH A DEPTH OF 6 M.
WARNING
DO NOT EXCEED THE MAXIMUM ASCENT RATE! Rapid as-
cents increase the risk of injury. You should always make the
Mandatory and Recommended Safety Stops after you have ex-
ceeded the maximum recommended ascent rate. If this Mandatory
Safety Stop is not completed, the decompression model will
penalize your next dive(s). Continuous ascent rate violations will
result in Mandatory Safety Stops. When Recommended Deep
Stop is enabled, the length is indicated in seconds.
6.1.5. Stopwatch (Timer)
You can also use a stopwatch during diving for various timing purposes. To activate
the stopwatch in the DIVE mode, long-press the MODE button, then start and stop it
by short-pressing the SELECT button.
64

Table of Contents

Other manuals for Suunto D4i

Related product manuals