To calibrate Suunto Foot POD Mini with Suunto Quest:
1. Attach Suunto Foot POD Mini to your shoe. For more information, see
Suunto Foot POD Mini Quick Guide.
2. Choose a custom mode to connect Suunto Quest with Suunto Foot POD
Mini.
3. Start running at your usual pace. When you cross the starting line, press
START STOP to start the recording.
4. Run a distance of 800–1000 m (about 0.500–0.700 miles) at your usual pace
(for example two laps on a 400 m track).
5. Press START STOP when you reach the finish line.
6. Scroll with NEXT through summary views, until you reach the distance
summary. Adjust the distance shown on the display to the actual distance
you ran with START STOP and LIGHT LOCK. Confirm with NEXT.
7. Confirm the POD calibration by pressing START STOP. Your Foot POD Mini
has now been calibrated. You can also calibrate your Suunto Bike POD in
a similar way.
43
en
To Next Page
Loading...
