DescriptionContent
Covered distance during current lap (if paired with a wireless speed
and distance POD)
lap dist
Average speed of current lap (if paired with a wireless speed and
distance POD)
lap spd
Speed according to selected units in UNITS settings (if paired with a
wireless speed and distance POD)
speed
Training Effect, shows the total load of a workoutTE
Current temperaturetemp
Rate of ascent/descentvert. spd
To configure TRAINING mode displays:
1. In the settings menu, enter DISPLAYS.
2. Scroll to DISPLAY 1 or DISPLAY 2 with [Lap +] and [Light -] and enter with [Mode].
3. Scroll to the row or view with [Lap +] and [Light -] and enter with [Mode].
4. Scroll through the functions with [Lap +] and [Light -] and enable a function with
[Mode]. A tap is displayed next to the enabled function.
5. Press [Start Stop] to exit.
25
en
To Next Page
Loading...
