DescriptionValueSetting
Upper speed limit00:00upper
To set the speed limits:
1. In the settings menu, enter SPD/DST.
2. Scroll to SPD LIM with [Lap +] and [Light -] and enter with [Mode].
3. Set the limits on or off with [Lap +] and [Light -] and accept with [Mode].
4. Change the high and low speed limits with [Lap +] and [Light -] and accept with
[Mode].
5. Press [Start Stop] to exit.
6.5 Using autopause
AUTOPAUSE is a feature that will automatically stop the log recorder during your training
session when very slow speed is detected while using your Suunto speed and distance
POD. The session is reactivated when you speed up again.
To activate autopause:
1. In the settings menu, enter SPD/DST.
2. Scroll to PAUSE with [Lap +] and [Light -].
3. Set autopause off, or activate it for one or all PODs with [Mode].
4. Press [Start Stop] to exit.
43
en
To Next Page
Loading...
