Suunto T6D - After Training; Viewing Logbook

●
Switch between the two TRAINING displays to view various data about your
exercise.
●
Set HR limits on or off by keeping [View Back] pressed in TRAINING mode.
5.7 After training
5.7.1 Viewing logbook
While the log recorder is running, your Suunto t6d collects various data about the
session, such as EPOC and calories burned. This data is saved in your device’s memory.
The content of the log depends on the parameters you have selected (see Section 4.7
Selecting log parameters). You can view the training data in the logbook.
To view logbook:
1. In settings menu, enter TRAINING.
2. Use [Lap +] and [Light -] to scroll to LOGBOOK and enter with [Mode]. The available
free space in memory is briefly displayed before the logs.
3. Enter VIEW with [Mode].
4. Scroll through the logs using [Lap +] and [Light -] and open a log with [Mode].
5. Press [Lap +] or [Light -] to scroll through the log totals.
TIP: You can view the summary of the last training log by keeping [Lap +] pressed in
TRAINING mode.
38