3. Scroll through the parameters with [Lap +] and [Light -] and set the parameters
on or off with [Mode].
4. Press [Start Stop] to exit.
TIP: If you record altitude information during your training, you will be able to analyze
the effect of altitude changes to your heart rate with the Suunto Training Manager software.
NOTE: Recording R-R (heart rate interval data) requires a lot of memory space. If R-R is
not recorded, more memory space is available for longer logs. However, you will not be able
to analyze any body parameters with the software, e.g. the EPOC curve.
30
To Next Page
Loading...
