To Next Page
J
joan66Sep 13, 2025
Why Suzuki Engine vibrates excessively?
- ZzallenSep 13, 2025
Excessive vibration in your Suzuki Engine can be caused by: * A damaged propeller. * Loose engine mounting bolts or clamp screws.
Why Suzuki Engine vibrates excessively?
Excessive vibration in your Suzuki Engine can be caused by: * A damaged propeller. * Loose engine mounting bolts or clamp screws.
General| Engine Type | 4-stroke, DOHC |
|---|---|
| Full Throttle Operating Range | 5, 500 - 6, 100 rpm |
| Starting System | Electric |
| Steering | Remote |
| Trim Method | Power Trim and Tilt |
| Gear Ratio | 2.08:1 |
| Max Output | 250 HP |
| Fuel Delivery System | Electronic Fuel Injection |
| Alternator | 54 A |
| Ignition System | Fully Transistorized |
Explains signal words and symbols used for hazard communication.
Provides essential advice and precautions for outboard motor owners.
Discusses gasoline types, octane ratings, and ethanol blends.
Recommends gear oil types and API classification.
Discusses horsepower limits and proper motor installation.
Introduces the keyless fob and the immobilizer system functions.
Provides instructions for replacing the keyless fob battery.
Step-by-step guide for installing the outboard motor propeller.
Introduction to the multi-function gauge and its capabilities.
How to select different display screens on the multi-function gauge.
Accessing diagnostic codes and caution messages.
Explains how alarm indicators alert the user to operating conditions.
Explains warnings for engine speed exceeding limits.
Explains warnings for high engine oil temperature.
Explains warnings for engine overheat due to insufficient cooling.
Explains cautions for errors in the electronic control unit communication.
Cautions for errors in the control system of the 2nd station.
Cautions for errors in the electronic throttle control system.
Cautions for errors in the electronic shift control system.
Cautions for communication errors between gauges.
Overview of cautions related to the keyless start system.
Cautions for keyless fob identification errors.
Cautions for low keyless fob battery voltage.
Cautions for low keyless control unit battery voltage.
Explains the self-diagnostic system for abnormal conditions.
Informs the operator when the motor stalls while operating.
Alerts if water separated from fuel exceeds a specific volume.
Procedures for starting the engine using the keyless start system.
Procedures for starting the engine using the ignition switch.
How to start each engine individually.
Procedures for stopping the engine without the keyless system.
Detailed schedule of services based on hours or months.
Procedures for changing the engine oil.
Steps for preparing the motor for long-term storage.
Technical specifications for DF250AP and DF300AP models.
