3-6 ENGINE
• Disconnect the starter motor lead wire 3.
• Disconnect the engine ground lead wire 4.
• Disconnect the respective lead wire couplers.
CKP sensor 5
Generator 6
Side-stand 7
GP switch 8
ECT sensor 9
• Disconnect the ignition coil/plug cap lead wire couplers 0 and
CMP sensor lead wire coupler A.
• Remove the ignition coil/plug caps B.
• Disconnect the PAIR hoses C.
Do not remove the ignition coil/plug cap before dis-
connecting its coupler.
* Do not pry up the ignition coil/plug cap with a screw
driver or a bar to avoid its damage.
* Be careful not to drop the ignition coil/plug cap to
prevent its short or open circuit.
To Next Page
Loading...
