2-15
ODOMETER/TRIP METER/
INSTRUMENT PANEL LIGHT
BRIGHTNESS B
The display has 4 functions; odome-
ter, two trip meters, and instrument
panel light brightness. When the igni-
tion switch is turned to the “ON” posi-
tion, the test pattern shown below is
displayed for 2 seconds. After the test
pattern is displayed, the display will
show the function that was displayed
the last time that the ignition switch
was turned off.
NOTE:
• Press and hold the ADJ button 7
and turn on the ignition switch.
Hold the ADJ button 7 for 4 sec-
onds to switch between km and
mile. At this time, the speedome-
ter will be changed between km/h
and mph and the instantaneous/
average fuel economy meter will
be changed between km/L (L/100
km) and MPG.
• Select km or mile, as appropriate,
to comply with traffic regulations.
• Check the km and mile display
after adjusting the instrument
panel display.
TRIP
A B
TRIP
To Next Page
Loading...
