6-7
3. Place a cloth between the meter
panel and the fuel tank to prevent
damage to the fuel tank.
4. Remove the meter panel starting
from the rear end portion. Lightly
press the fairing toward the out-
side of the motorcycle (in the
direction of the arrow), and lift the
mating surface on the rear end of
the meter panel above the fairing.
Disengage the hook (marked with
a dotted circle) on the side of the
meter panel.
NOTICE
When removing the meter panel,
the bolt mounting part on the rear
end may cause damage to the fuel
tank and fairing.
When removing the meter panel,
use a cloth to prevent scratches,
and carefully remove the panel
using the following procedure.
To Next Page
Loading...
