6-8
5. Pull out the meter panel toward
the rear end of the motorcycle (in
the direction of the arrow). In
doing so, the hooks (marked with
a dotted circle) also come off.
INSTALLATION
1. Install the meter panel starting
from the front end portion. Lightly
insert the front end of the meter
panel into the central end face of
the fairing (place marked with a
circle) as shown in the illustration.
2. As the outer side of the front end
of the meter panel bulges, lightly
insert the place marked with a cir-
cle as well while aligning it with
the hooks.
To Next Page
Loading...
