7-40
8. Draw out the axle shaft.
9. Slide the front wheel forward.
10.Put the new wheel in place
and insert the axle shaft.
11.Remove the jack and service
stand.
12.Hold the shaft and tighten the
bolt 5 to the specified torque.
13.Tighten the axle holder bolts
6 to the specified torque.
14.Move the steering up and
down several times to seat the
axle shaft.
15.Tighten the axle holder bolts
7 to the specified torque.
16.Reinstall the brake calipers.
17.After installing the wheel,
apply the brake several times
to restore the proper lever
stroke.
PartShark.com
877-999-5686
To Next Page
Loading...
