3-28
To set the compression damping
force adjuster to the standard
position, turn the adjuster clock-
wise until it stops and then turn it
counterclockwise 8 clicks until the
two punch marks align. If the two
punch marks do not align by turn-
ing out 8 clicks, turn in or out the
adjuster until two punch marks
align.
Turn the adjuster clockwise from
the standard position to stiffen the
damping force. Turn the adjuster
counterclockwise to soften the
damping force. The damping
force should be adjusted gradu-
ally, 1 click at a time, to fine-tune
the suspension.
SEAT TAIL COVER
A seat tail cover for solo riding
can be attached to the motorcy-
cle. To replace the rear seat with
the seat tail cover, follow the pro-
cedure below.
1. Remove the rear seat.
2. Remove the passenger hand
rail by removing the 4 bolts.
PartShark.com
877-999-5686
To Next Page
Loading...
