7-23
ENGINE COOLANT
Coolant level
The engine coolant solution
should be between the “F” (full)
and the “L” (low) level lines on the
engine coolant reservoir. If the
level is lower than the “L” (low)
level line, bring it up to the “F”
(full) level by adding a 50:50 mix-
ture of distilled water and engine
coolant.
To add mixed coolant:
1. Place the motorcycle on the
side stand.
2. Remove the right fairing by
referring to the ENGINE OIL
section.
CAUTION
Spilled brake fluid can damage
painted surfaces and plastic
parts.
Avoid spilling any fluid when
filling the reservoir. Wipe up
spills immediately.
PartShark.com
877-999-5686
To Next Page
Loading...
