3-21
SEAT LOCK AND
HELMET HOLDERS
Front Seat
To remove the front seat.
1. Remove the right and left bolts
1.
2. Raise the front end of the seat
and slide it forward.
To reinstall the seat, slide the seat
hooks into the seat hook retainers
on the frame and tighten the bolts
securely.
Rear Seat
The seat lock is located under the
left frame cover. To remove the
rear seat, insert the ignition key
into the lock and turn it clockwise.
Raise the rear end of the seat and
slide it backward.
WARNING
Failure to install the seat prop-
erly could allow the seat to
move and cause loss of rider
control.
Fasten the seat securely in its
proper position.
PartShark.com
877-999-5686
To Next Page
Loading...
