3-24
SUSPENSION ADJUSTMENT
The standard settings of both
front and rear suspensions are
selected to meet various riding
conditions such as low to high
motorcycle speed and light to
heavy load on the motorcycle.
The suspension settings can be
adjusted for your preference and
fine-tuning.
FRONT SUSPENSION
Spring Pre-load Adjustment
To set the spring pre-load to the
standard position, turn the
adjuster 1 clockwise until it stops
and then turn it counterclockwise
6 turns.
Turn the adjuster clockwise from
the standard position to stiffen the
spring pre-load. Turn the adjuster
counterclockwise to soften the
spring pre-load.
PartShark.com
877-999-5686
To Next Page
Loading...
