3-25
Damping Force Adjustment
The rebound and compression
damping force can be individually
adjusted by turning the respective
adjusters. The rebound damping
force adjuster 2 is located at the
top of the front suspension. The
compression damping force
adjusters 3 are located at the
bottom of the front suspension.
To adjust the damping force, set
the adjuster to the standard set-
ting first and then adjust the
adjuster to the desired position.
To set the rebound damping force
adjuster to the standard position,
turn the adjuster clockwise until it
stops and then turn it counter-
clockwise 8 clicks.
Turn the adjuster clockwise from
the standard position to stiffen the
damping force. Turn the adjuster
counterclockwise to soften the
damping force. The damping
force should be adjusted gradu-
ally, 1 click at a time, to fine-tune
the suspension.
PartShark.com
877-999-5686
To Next Page
Loading...
