3-26
To set the compression damping
force adjuster to the standard
position, turn the adjuster clock-
wise until it stops and then turn it
counterclockwise 8 clicks.
Turn the adjuster clockwise from
the standard position to stiffen the
damping force. Turn the adjuster
counterclockwise to soften the
damping force. The damping
force should be adjusted gradu-
ally, 1 click at a time, to fine-tune
the suspension.
NOTE: Do not loosen the adjuster
base 4, or front fork oil will ooze
through the adjuster base.
WARNING
Unequal suspension adjust-
ment can cause poor handling
and loss of stability.
Adjust the right and left front
forks to the same settings.
PartShark.com
877-999-5686
To Next Page
Loading...
