7-27
2. Allow the chain to dry, then
lubricate the links with Suzuki
chain lube or an equivalent
chain lubricant.
Drive Chain Adjustment
20 – 30 mm
(0.8 – 1.2 in)
Inspect the drive chain slack
before each use of the motorcy-
cle. Place the motorcycle on the
side stand. The drive chain should
be adjusted for 20 – 30 mm (0.8 –
1.2 in) of slack, as shown.
CAUTION
Some drive chain lubricants
contain solvents and additives
which could damage the O-
rings in your chain.
Use Suzuki chain lube or an
equivalent chain lubricant that
is specifically intended for use
with O-ring chains.
WARNING
Too much chain slack can
cause the chain to come off the
sprockets, resulting in an acci-
dent or serious damage to the
motorcycle.
Inspect and adjust the drive
chain slack before each use.
PartShark.com
877-999-5686
To Next Page
Loading...
