Suzuki LT-F400F - Front Suspension Upper; Lower Arm Bushing Removal and Installation

2B-11 Front Suspension:
Installation
1) Install the knuckle end with the special tool.
Special tool
(A): 09913–70210 (Bearing installer set)
2) Install the snap ring (1) with the special tool.
CAUTION
!
Replace the snap ring (1) with a new one.
Special tool
: 09900–06107 (Snap ring pliers)
3) Install the suspension arm. Refer to “Front
Suspension Upper / Lower Arm Removal and
Installation (Page 2B-8)”.
Front Suspension Upper / Lower Arm Bushing
Removal and Installation
B827H12206014
Refer to “Front Suspension Upper / Lower Arm Removal
and Installation (Page 2B-8)”.
Removal
Remove the front suspension arm bushing using a
hydraulic press and suitable tools.
Installation
Install the front suspension arm bushing using a
hydraulic press and suitable tools.
CAUTION
!
The removed bushing must be replaced with
a new one.
(A)
I827H1220030-01
1
I827H1220031-01
I827H1220043-02
I827H1220044-02