2-7
RIGHT HANDLEBAR
Throttle Lever 1
Control the engine speed with the
position of the throttle lever. Operate
this lever with your thumb. Push it for-
ward to increase engine speed.
Release it to decrease engine speed.
Front Brake Lever 2
Apply the front brake by squeezing
the front brake lever towards the grip.
THROTTLE LIMITER
Use the throttle limiter to restrict max-
imum engine power by limiting throttle
lever travel. Adjust this limiter accord-
ing to the rider’s skill and experience.
NOTE: The throttle limiter position A
is preset at 7 mm (0.27 in) from the
factory.
To adjust the throttle limiter:
1. Loosen the lock nut 1.
2. Turn the throttle limiter screw 2
clockwise or counterclockwise to
adjust maximum engine power.
Turning the screw clockwise will
restrict maximum engine power.
3. Tighten the lock nut 1.
This ATV comes from the factory with
a maximum speed reduction spacer
installed in the drive train system and
the throttle limiter set for a maximum
speed of approximately 24 km/h (15
mph). You can decrease the maxi-
mum vehicle speed further by adjust-
ing the throttle limiter according to the
previous procedure. When the rider
has developed sufficient skill and
experience to operate the ATV safely
at higher speeds, you can increase
the maximum speed capability of the
ATV by removing the maximum speed
reduction spacer from the drive train
system.
To Next Page
Loading...
