4-3
IN CASE OF OVERHEATING (ENGINE
COOLANT TEMPERATURE WARNING
INDICATOR LIGHT COME ON)
If the engine coolant temperature warning
indicator light 1 come on, stop the motor-
cycle in a safe place, perform the following
checks, and take any necessary action.
1. Turn the ignition switch to the “OFF”
position to stop the engine.
2. Turn the ignition switch to the “ON” posi-
tion to start the radiator fan and cool the
engine.
If the radiator fan does not operate, do
not start the engine. Consult your dealer.
3. Once the engine has sufficiently cooled,
check the coolant level and check hoses
and such for leaks.
a.If you find any leaks, do not start the
engine. Consult your dealer.
b. Replenish the coolant if the coolant
level is low and there are no leaks. If
you have to use water instead of cool-
ant, consult your dealer as soon as
possible to have the coolant checked
and replaced.
4. If no issues are found, the motorcycle
can be ridden once the engine coolant
temperature warning indicator light go
off. Consult your dealer for inspection as
soon as possible.
To Next Page
Loading...
