Suzuki VL1500K7 - ENGINE IDLE SPEED ADJUSTMENT

HAMAMATSU-NISHI P.O. BOX 1, 432-8611 HAMAMATSU, JAPAN.
MOTORCYCLE
DATE:
May 16, 2006
PAGE
: 10
OF
13
Energy Conserving
Suzuki does not recommend the use of “ENERGY
CONSERVING” oils.
Some engine oils which is API SH or greater has
“ENERGY CONSERVING” indication in API classifica-
tion doughnut mark.
These oils can affect engine life and clutch perform-
ance.
IDLE SPEED ADJUSTMENT
[Page: 51, 52 Paragraph: 2]
After completing all of the servicing procedures and
the test ride, adjust the engine idle speed by turning
the throttle stop screw knob.
Engine idle speed: 900–1 100 r/min
A: Throttle stop screw knob
RecommendedNot recommended
E
N
E
R
G
Y
C
O
N
S
E
R
V
I
N
G
A
P
I
S
E
R
V
I
C
E
S
J
SAE
10W-40
A
P
I
S
E
R
V
I
C
E
S
J
SAE
10W-40
NOTE:
The engine idle should be adjusted with engine
warmed up.
4. TIGHTENING TORQUE [Page: 53, 54, 55]
Item Part Name N·m kgf-m
FRONT FORK
A Handlebar clamp bolt 16 1.6
B Steering stem head nut 90 9.0
*C Handlebar holder nut 70 7.0
*D Front fork upper bracket bolt 23 2.3
E Front fork lower bracket bolt 23 2.3
F Front axle clamp bolt 23 2.3
BRAKE
G
Front brake and clutch master cylinder
mounting bolt
10 1.0
H Front brake caliper mounting bolt 35 3.5
I Rear brake master cylinder mounting bolt 10 1.0
J Rear brake caliper mounting bolt 35 3.5
Item Part Name N·m kgf-m
K Rear brake push rod lock nut 18 1.8
L Brake caliper air bleeder (Front) 7.5 0.75
M Brake caliper air bleeder (Rear) 7.5 0.75
AXLE
N Front axle 65 6.5
O Rear axle nut 110 11.0
ABSORBER
P Rear shock absorber nut (Upper) 50 5.0
Q Rear shock absorber nut (Lower) 50 5.0
OTHERS
R Rear swingarm pivot nut 100 10.0
S Front footrest bolt 50 5.0
AA
BB
CC
GG
E
E
D
D
GG