Input 2 x LEMO 5-pin: six channels Direct or IEPE type and 2 channels for force
transducers
Dynamic Range 90 dB
Force Range 0.2 N ÷ 200 N (dedicated channels for force transducers)
Sampling Rate 6 kHz
Memory Internal 16 MB non-volatile memory
8 GB Micro SD card included (micro SD flash card slot supports cards up
to 16 GB)
Display Super contrast (10000:1) OLED 2.4” colour display (320 x 240 pixels)
Interfaces USB 1.1 Client, Extended I/O - AC output (1 V Peak) or Digital Input/Output
(Trigger - Pulse)
Power Supply Four AA batteries (alkaline) operation time > 12 h (6.0 V / 1.6 Ah)2
Four AA rechargeable batteries operation time > 16 h (4.8 V / 2.6 Ah)2 (not
included)
USB interface 500 mA HUB
Environmental Conditions Temperature from -10 °C to 50 °C
Humidity up to 90 % RH, non-condensed
Dimensions 140 x 83 x 33 mm (without accelerometer)
Weight Approx. 390 grams including batteries (without accelerometer)
To Next Page
Loading...
Need help?
General
