TROUBLE SHOOTING
TROUBLE SHOOTING
6.1 FAQ
6.1 FAQ
Please refer to the FAQ table below for easy trouble shooting. The table below
describes some typical problems and also their solutions. Please check them before
calling your DVR dealer.
48
PROBLEM SOLUTION
No power Check power cord connection.
Confirm that there is power at the outlet.
Not working when pressing any button Press any key and then enter the password to exit “Key
Lock” mode.
Timer record is not working Check if the “RECORD ENABLE” is set to “YES”.
No live video Check camera video cable and connections.
Check monitor video cable and connections.
Confirm the camera is power supplied.
Check the setting of camera lens.
No recorded video Check if the HDD is installed and connected properly
DVR keeps rebooting Users could align the power connector and HDD closely, or
change another suitable HDD.
Detect HDD fail Change another HDD for testing.
Change another HDD cable for testing.
Make sure HDD “Master”, “Slave” mode is correctly set.
Can’t detect USB thumb-drive Change another USB thumb-drive to test.
Can’t view the DVR over the network with
a web browser
Update the JAVA program
Update the firmware of the software AP
To Next Page
Loading...
